Back to Appliances

How Do You Descale a Washing Machine?

How Do You Descale a Washing Machine?
Cleaning Guides Team 23 May 2025

In a hard water area, limescale deposits inside a washing machine on the heating element, the drum and the internal pipework. The element is the part that matters, because scale insulates it, so it takes longer to reach temperature, uses more electricity and eventually fails. None of that is visible from the outside.

Do you need to?

It depends entirely on the water hardness where you live. Much of southern and eastern England is hard or very hard; much of Scotland, Wales, Northern Ireland and the north west is soft. Your water supplier publishes the hardness for your postcode.

In a soft water area, descaling is unnecessary. In a hard water area it is worth doing two to four times a year.

What should you use?

  • Citric acid – effective, cheap and the most practical option. Around 100g in the drum on a hot empty cycle.
  • White vinegar – two cups in the drum, milder and slower.
  • A proprietary washing machine descaler – formulated for the job and more expensive.
  • Powder detergent with a water softener additive – prevents build up rather than removing it.

Citric acid is what most descaling products are based on and it costs a fraction as much bought as a powder.

What is the method?

  1. Empty the drum completely.
  2. Put the descaler directly into the drum, not the drawer.
  3. Run the longest, hottest cycle the machine offers, ideally 90 degrees.
  4. Let the cycle complete fully.
  5. Run a short rinse cycle afterwards to clear any residue.
  6. Wipe the door seal and the drum, which will have loosened deposits in them.

Do not mix descaler with detergent or bleach in the same cycle.

How often?

Every three months in a very hard water area, twice a year in a moderately hard one, and not at all in a soft one. Combining it with a maintenance wash means one of the monthly hot cycles is a descaling cycle rather than a cleaning one.

Alternating between a powder detergent maintenance wash and a citric acid descale covers both jobs across a quarter.

What are the signs of scale?

White chalky deposits on the heating element if you can see it through the drum holes. Washing that feels stiff or looks dull. Longer cycle times. A heating element that fails, which usually shows as cold washes or an error code. Scale flakes appearing in the drum.

Scale in the kettle and on taps is a reliable indicator that the machine is affected too.

Are water softening additives worth it?

The tablets and powders sold to add to each wash do work, and in a hard water area they let you use less detergent, which offsets some of the cost. Powder detergents often already contain a softening agent, which is one reason they perform better than liquids in hard water.

A plumbed in water softener treats the whole house and is a significant investment that pays back in appliance life, heating efficiency and detergent use if the water is genuinely hard.

Do the magnetic and electronic devices work?

Independent evidence for the clip on magnetic and electronic scale devices is weak, and the claims are widely disputed. A conventional ion exchange softener or regular descaling are the approaches with a solid basis.

Does scale cause the smell as well?

Indirectly. Scale gives biofilm a rough surface to establish on, and the two problems tend to appear together in hard water areas. Descaling and a hot maintenance wash with powder detergent address both, which is why doing them together makes sense.

Does it affect the washing itself?

It does. Hard water reduces the effectiveness of detergent, so more of it is needed for the same result, and the minerals deposit in the fabric as well as in the machine. Towels washed in hard water without a softening additive go stiff and grey over time, and the cause is mineral deposit rather than dirt, which is why more detergent does not fix it and a softener does.

More Washing Machines guides · All Appliances guides