Before touching a wine stain on a sofa, find the cleaning code. It is on a label under a seat cushion or on the underside of the frame, and it determines whether water can be used at all. Treating an S coded sofa with water leaves a permanent ring that is more visible than the wine was, and it is the most common way people make this situation worse.
What do the codes mean?
- W – water based cleaners are safe.
- S – solvent only. Water will leave a ring or shrink the fibres.
- WS – either water or solvent based products are acceptable.
- X – vacuuming and brushing only. No liquid of any kind at home.
If there is no label, treat the piece as S and test any product on a hidden area, such as the back of the frame or the underside of a cushion.
What is the first response regardless of code?
Blot, immediately and thoroughly, with a clean white cloth. Press straight down and lift rather than wiping. Keep moving to a dry section, and work from the outside of the spill inwards.
This stage is safe on every upholstery type and removes most of the liquid. If the cushion cover comes off and can be washed, take it off now while the wine is still wet.
What is the method for W and WS fabric?
- Mix a small amount of washing up liquid into cool water and whisk it into a foam.
- Apply the foam only, not the liquid, with a cloth or a soft brush.
- Work in small sections and always treat a whole cushion or panel rather than a patch.
- Blot with a clean dry cloth.
- Wipe over with a cloth wrung out in clean water to remove the residue.
- Press a dry towel down hard to draw out as much moisture as possible.
- Dry quickly with a fan or an open window.
Using the foam rather than the water is the key. It carries the cleaning action with a fraction of the moisture, which is what prevents a ring.
Why do water rings form?
Because water carries dissolved dirt outwards as it spreads, and when it evaporates it leaves that dirt concentrated at the edge of the damp area. Minerals in tap water make it worse. The result is a faint outline larger than the original stain.
Working out to a natural seam or edge, using minimal moisture and drying quickly all help. If a ring does form, lightly dampening the whole panel and drying it evenly sometimes blends it out.
What is the method for S coded fabric?
Blot thoroughly, then use a proprietary solvent based upholstery cleaner following the instructions on the can. Do not improvise with household solvents, which can dissolve backing adhesives and dye.
Test in a hidden area and wait for it to dry fully before assessing, since some solvents lighten dye.
What about leather?
Wine on pigmented leather usually wipes off with a damp cloth if caught quickly, since the coating keeps it on the surface. Blot immediately and wipe with a cloth dampened in warm water, then dry.
Aniline and unfinished leather absorbs readily and a wine spill may be permanent. Blot, do not rub, and contact a leather specialist rather than experimenting.
Does a wet vacuum help?
Considerably, if you have one. A wet and dry vacuum or an upholstery extraction tool removes the moisture you have introduced, which is the part that is otherwise difficult. It is the main advantage a professional has over a cloth and a bowl.
When should you call someone in?
For an X coded piece, for velvet, silk or wool upholstery, for a large spill that has soaked into the foam, and for anything valuable. Professional upholstery cleaning uses extraction equipment that removes the water it puts in, and the cost is usually less than the risk of a permanent ring on a sofa.