A tailored jacket is not a piece of fabric sewn into a shape. It contains a canvas or fused interlining, shoulder padding, a sleeve head roll, a lining and sometimes horsehair, all shaped and pressed into a three dimensional form. Water makes each of those materials shrink and move differently, which is why a washed jacket comes out puckered and never recovers.
So how should a suit be cleaned?
Rarely, and professionally when it is. The routine is brushing, airing, steaming and spot cleaning, with dry cleaning perhaps two or three times a year for a suit in regular use. Dry cleaning is mildly hard on fabric and trims, so doing it monthly ages the garment unnecessarily.
Trousers need cleaning more often than the jacket, since they take more contact and more wear. Having them cleaned separately is normal and sensible, though cleaning both together occasionally keeps the colour matched.
What does brushing achieve?
More than people expect. A clothes brush with natural bristles lifts dust, hair and surface soil out of the weave before it works in and becomes a stain. Brush downwards, following the nap, after each wearing.
On wool this genuinely extends the interval between cleans, because most of what makes a jacket look tired is particulate soil sitting in the fabric rather than anything absorbed into it.
How should it be aired?
On a proper wide shaped hanger, somewhere with air movement, for at least a few hours and ideally overnight before it goes back in the wardrobe. Never hang a worn jacket straight into a packed wardrobe, where moisture and odour are trapped against the fabric.
Hanging it in a bathroom after a shower uses the steam to relax creases, which is a reasonable alternative to steaming it directly.
Is a steamer useful?
Very. A garment steamer relaxes creases, removes light odours and refreshes wool without any of the risks of an iron. Hang the jacket, work from the top down holding the head a few centimetres away, and let it dry fully on the hanger before wearing.
An iron is the wrong tool for a jacket. Direct pressure flattens the shaping, crushes the sleeve head and causes shine on dark wool. If pressing is needed, a tailor or a dry cleaner has the right equipment.
How do you spot clean a mark?
Gently and early. Blot a fresh liquid spill immediately with a clean dry cloth, pressing rather than rubbing. For anything that remains, dab with a barely damp cloth and work from the outside of the mark inwards.
Do not use household stain removers on tailoring. Lining fabrics, interlinings and dyes all react unpredictably, and a bleached patch on a jacket is worse than the stain. For anything significant, take it to a cleaner and tell them what caused it.
How should a suit be stored?
- On a wide shaped hanger that supports the shoulders, never a wire one.
- With space around it, so air circulates and the fabric is not crushed.
- Trousers on a clip hanger by the hem, or folded along the crease line.
- Pockets emptied, which prevents the fabric distorting.
- In a breathable cotton garment bag for long term storage, never plastic.
- With cedar or lavender nearby, since wool is a target for clothes moths.
Why should plastic covers be removed?
Because they trap residual solvent and moisture against the fabric, which over months causes yellowing and can encourage mould. Take the dry cleaner cover off the moment the garment comes home, and let it hang in the open for a day before it is put away.
How do you make a suit last?
Rotate it. A suit worn two days running has no chance to dry out and recover its shape, and the fabric wears far faster. Alternating between two suits more than doubles the life of both, which is the strongest practical argument for owning a second one.